SupTronics X1008 3.5" + 2.5" SATA Expansion for Raspberry Pi 5

The SupTronics X1008 3.5" + 2.5" SATA HDD Expansion for Raspberry Pi 5 supports one 3.5" SATA HDD and one 2.5" SATA HDD/SSD at up to 5Gbps via PCIe. Powered via 12V DC jack with onboard step-down converters, it simplifies NAS and media storage setups.

Introducing the SupTronics X1008 3.5" + 2.5" SATA HDD Expansion, designed to provide a mass-capacity storage and high-speed storage solution via PCIe, for your Raspberry Pi 5. This board facilitates the simultaneous connection of a 3.5" HDD and a 2.5" HDD/SSD, with SATA 3.0 interface speeds reaching up to 5Gbps.

With support for 12V 3A input via a standard DC jack (power supply not included) and equipped with high-efficiency DC/DC step-down converters, the X1008 efficiently powers both your Raspberry Pi 5 and HDDs from a single power source, simplifying your setup. Do not power your Pi 5 via USB-C at the same time as the barrel jack!

The X1008 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system.

SSD/HDD, Raspberry Pi, Active Cooler and power supply not included.

Features

• Compatible with Raspberry Pi 5
• Supports the connection of a 3.5" SATA HDD and a 2.5" HDD/SSD to your Pi 5 simultaneously
• Supports up to 16TB (3.5" HDD) + 4TB (2.5" HDD/SSD) SATA disk drives
• Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
• Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
• Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
• Compatible with SATA 6G, 3G, and 1.5G hard drives
• LED indicators display power and drive status
• High-efficiency DC/DC step-down converter to power both your Raspberry Pi 5 and SATA devices simultaneously
  • 12V Barrel Jack power supply not included
• Efficient power delivery to the Raspberry Pi 5 via pogo pins
• On-board push button performs the same actions as the Pi's power button
• Compatible with the Raspberry Pi Active Cooler without compromising cooling performance
• Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down

The X1008 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.

Do not power the X1008 via the DC power jack and the Raspberry Pi 5 via USB-C at the same time.

Specifications

Power supply	12VDC ±5% ≥3A via DC power jack 5.5×2.1mm
Ports & connectors	PCIe connector ×1 – 16-pin pitch 0.5mm
	SATA connectors ×2 – 7+15P
PCIe FFC cable length	37mm
PCB size	164.5mm × 101.6mm

Resources

• Software setup/tutorials
• Hardware information and assembly

Package Contents

• 1x SupTronics X1008 3.5" + 2.5" SATA HDD Expansion for Raspberry Pi 5
• 1x 37mm PCIe cable
• 1x Screw pack

SSD/HDD, Raspberry Pi, Active Cooler and power supply not included.