Raspberry Pi Compute Module 5 Programming Jig

The Raspberry Pi Compute Module 5 Programming Jig has been designed to allow OEM customers to efficiently load operating system images into the onboard eMMC Flash of Compute Module 5 boards during the production process.

After setting up the jig’s software and connecting the ports you require, all you need to do is insert the Compute Module 5 into the module bay and press the clamp shut. No further interventions are required - the status LED will tell you when the unit has been programmed.

On the back of the Programming Jig, you’ll see a small set of ports, including Ethernet for the jig and the Compute Module 5 you want to program, and a USB programming port to manually update the jig software. There are also two activity LEDs - one for the jig and one for the module - that signal what the devices are doing.

To go even faster, you can connect both the JIG ETH and DUT ETH ports to the same network. The jig comes with a multi-head 12V 2A PSU (UK, EU, US and AUS), RJ45 cables, antenna, spare pogo pins and a tweezer tool.

Compute Module 5 not included

Features

• Single-head design provisions one Compute Module 5 at a time
• Mechanical clamping secures the Compute Module 5 in place during programming
• Pogo pin interface connects directly to Compute Module 5 without a carrier board
• LED status indicators communicate the current state of the jig and provisioning progress
• Dual network connectivity connects the jig to the provisioning network by Ethernet (JIG ETH) or Wi-Fi, with a second Ethernet port (DUT ETH) for accelerated software transfer to the Compute Module 5 being programmed
• Automated provisioning supports secure boot, full-disk encryption, and bare operating system installation
• Compatible with Compute Module 5 (CM5) only

Resources

• Announcement blog post
• Raspberry Pi Compute Module 5 Programming Jig documentation
• Product brief
  
• Product number: Raspberry Pi SC2357
• EAN: 5056561806259

Package Contents

• 1x Raspberry Pi Compute Module 5 Programming Jig
• 1x 12V 2A multi-head power supply (UK, US, EU and AUS)
• 1x RJ45 cables
• 1x Antenna
• 5x Spare pogo pins
• 1x Tweezers

Compute Module 5 not included