Industrial pH Electrode - Armor Casing [Discontinued]

This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good reproducibility, difficult to hydrolysis, and basically eliminate the alkali error .In 0 to 14pH range,the output voltage of the electrode is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance.The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection.
Note: This is a probe only, and it could be a upgrade part for Analog pH Meter (SEN0161). If you need an industrial long-term pH sensor directly, please check Industrial pH Meter Kit Pro (SEN0169)Industrial pH Meter Kit Pro (SEN0169). And the output voltage feedback is from 0 to 5v to indicate pH value from 0 to 14.

Applications

The electrode is suitable for all kinds of printing, circuit board factory, waste water containing chromium and other industrial and domestic sewage pH monitoring.

Specification

• Length (with protective cover)：17.7cm(6.97")
• Diameter：2.74cm(1.08")
• Wire Length：5m(196.85")
• Connector：BNC
• Measuring Range：0-14pH
• Measuring Precision: ≦0.02pH
• Suitable Temperature: 0-60℃
• Response Time:10sec
• Drift：≦0.02PH/24hours
• Resistance of Sensitive Membrane: ≦200*106Ω
• Slope: ≧95 %
• Electrode's Equipotential Point:7±0.5PH

Documents

• WiKi Doc

Shipping List

• H-101 pH electrode ×1
• pH electrode manual ×1