Industrial IO HAT+ for Pi 5 and Argon Industria Cases

Need to interface a Raspberry Pi 5 with industrial I/O? Or implementing data acquisition solutions in an industrial setting using Raspberry Pi 5?

The Cytron Industrial IO HAT+ for Raspberry Pi 5 covers these scenarios and more. With the wide range of I/O interfaces readily available on board including RS485, RS232, isolated inputs/outputs and more - the job of interfacing your industry-grade sensors to the Raspberry Pi is made much simpler.

This board is ideal for engineers, system integrators, and makers who want to incorporate industrial-grade I/O into their Raspberry Pi projects without hassle, with reliability, flexibility, and plug-and-play simplicity.

Raspberry Pi and Industria enclosure not included

Supported Industria enclosures

The Industrial IO HAT+ is designed to be used with Industria cases from Argon40:

• Argon Industria Base
• Argon Industria HMI 5C - Enclosure for 5" Touch Display 2
• Argon Industria HMI 7C - Enclosure for 7" Touch Display 2
• Argon Industria HMI 8CS - 8" Touch Display + Enclosure for Pi 5
• Argon Industria HMI 10CS - 10" Touch Display + Enclosure for Pi 5

Features

• Industrial I/O interfacing HAT for Raspberry Pi 5
• Interfaces
  • 1x RS485
  • 1x RS232
  • 6x isolated digital input (up to 50V)
  • 4x isolated digital output (up to 50V)
• Power Supply DC 10-30V surge protected
• Support LetsTrust TPM Module (optional)
• 2x Programmable LEDs
• Status LEDs for RS485, RS232, DIN & DOUT
• 1x Programmable active buzzer

Specifications

Parameter	Specification	Min	Max	Unit
Power Input Voltage (Surge Protected up to 60V 20ms)		10	30	VDC
Maximum Current for Raspberry Pi (5V)		-	5	A
Isolated Digital Input	Low Level (VIL)	-	±0.8	V
Isolated Digital Input	High Level (VIH)	±3	±50	V
Isolated Digital Input	Isolation Voltage		3750	Vrms
Isolated Digital Output	Voltage	-	50	V
Isolated Digital Output	Current	-	500	mA
Isolated Digital Output	Isolation Voltage		1500	Vrms
RS485 Maximum Baud Rate			1	Mbps
RS232 Maximum Baud Rate			250	kbps
Operating Temperature		-20	60	°C
Relative Humidity (non-condensing)		10	80	%

Board Layout

Active Buzzer	User-programmable active piezo buzzer. Controlled by GPIO23 (active high).
Status LEDs	485 - Indicate the activity on RS-485. 232 - Indicate the activity on RS232. DI 0-5 - Turn on when the input is triggered. DO 0-3 - Turn on when the output is activated. LED0 - User programmable LED 0. Controlled by GPIO17. LED1 - User programmable LED 1. Controlled by GPIO18.
Display Power Connector	5V power supply connector for the display.
TPM Module Pin Headers	Plug in the LetsTrust TPM module here.
4A Fuse	4-Amp replaceable fuse for the system.
IO Terminal	Pluggable terminal for Inputs/Outputs. See the documentation for more details.
Raspberry Pi Headers	Connect to the Raspberry Pi 40-pin GPIO pin headers.

Resources

• User guide and datasheet
• CAD file

Package Contents

• 1x Industrial IO HAT+
• 1x 20-Pin Pluggable Terminal Block
• 3x M2.5x21mm PCB Stand
• 1x Sticker for Pinout

Raspberry Pi and Industria enclosure not included